A commercial real estate sponsor reviewing CMBS loan documents and Treasury bond yields to calculate a defeasance penalty.

Capital Markets & Structuring

The Architecture of CMBS Defeasance: Utilizing Bridge Capital to Escape Prepayment Penalties

How yield maintenance and CMBS defeasance differ, what a defeasance closing actually requires, and where bridge financing may fit into a recapitalization.

November 17, 20268 min readBy Price Capital Group

Many CMBS loans use long-term fixed-rate structures and include substantial restrictions on early repayment or collateral release. Exact terms depend on the loan documents. For a sponsor who plans to renovate, re-tenant, or restructure the capital stack partway through the term, those restrictions are usually the first thing to underwrite.

Two mechanisms appear most often in that analysis: yield maintenance and defeasance. They are frequently described together, and they are not the same thing. One is generally a cash payment calculated under a contractual formula. The other is generally a substitution of collateral while the debt remains outstanding.

This article explains how each mechanism is typically structured, what a CMBS defeasance closing involves, how to evaluate the cost of an early loan release, and where bridge financing may fit into a recapitalization. It is general educational information, not legal, tax, lending, or investment advice.

1. Yield Maintenance and Defeasance Are Different Exit Mechanisms

Yield maintenance generally involves repayment of the mortgage plus a contractual premium intended to compensate the lender for lost yield. Yield-maintenance formulas are intended to compensate the lender or investors for the economic effect of early repayment, but the precise calculation is controlled by the loan documents. A formula does not, by itself, promise an exact economic equivalence in every deal.

Benchmark rates matter. Lower benchmark rates can increase the cost of some yield-maintenance formulas, because the assumed reinvestment return is lower. Actual cost still depends on the loan documents, remaining term, contract rate, the applicable Treasury or other benchmark rate, the formula itself, and any minimum premium.

Defeasance works differently. Defeasance generally substitutes a permitted portfolio of government securities for the real estate collateral while the debt remains outstanding according to its scheduled terms. Defeasance is not itself a cash prepayment penalty. The borrower's outlay is usually the price of the securities plus transaction expenses, and the original loan generally continues to exist against the substitute collateral.

Which mechanism applies is a documents question, not a market convention. Defeasance is available only where the loan documents permit it and all contractual conditions are satisfied. Some loans use yield maintenance, some permit either method, some use a step-down penalty structure more typical of smaller balance or bank-held paper, and some restrict prepayment outright during part of the term. For a broader look at those structures, see our guide to commercial loan prepayment penalties.

A related restriction shapes the renovation plan itself. Many CMBS loan documents restrict additional debt, subordinate financing, transfers, or changes to the capital structure without required consent. That is one reason a mid-term value-add plan often cannot simply add a second mortgage.

2. How the CMBS Defeasance Process Works

Defeasance typically requires substitute collateral consisting of qualifying government securities structured to generate sufficient cash flow for the remaining scheduled loan payments. The substitute securities are structured so their scheduled payments are sufficient to service the remaining mortgage obligations according to the loan documents. In most structures the cash flows are sized to the loan's payment schedule rather than being identical dollar for dollar on every date.

Depending on the structure, defeasance may involve transferring the defeased loan obligation and securities to a successor borrower or special-purpose entity. That successor borrower documentation, together with the securities transfer, is what allows the original borrower and the property to exit the loan.

The Closing Team Behind a Defeasance

A CMBS defeasance may require:

  • CPA or accountant verification of the securities portfolio and cash-flow schedule.
  • Legal opinions from counsel for the borrower, the trust, or both.
  • Loan servicer review and consent documentation.
  • A securities intermediary or custodian to hold and administer the portfolio and remit payments.
  • Successor borrower formation, assumption, and transfer documents.
  • Rating agency or REMIC compliance confirmation where the transaction requires it.

Reducing the process to purchasing Treasury bonds understates it. The documentation and third-party review are part of what makes the substitution effective.

Federal income tax rules for REMICs contemplate government securities as substitute collateral, and they also condition the relief. Under those rules a mortgage is generally treated as defeased in a qualifying manner when, among other conditions, the mortgagor pledges substitute collateral consisting solely of government securities, the mortgage documents allow the substitution, the lien is released to facilitate a disposition or other customary commercial transaction, and the release is not within two years of the securitization's startup day. That startup day belongs to the securitization, so it is not necessarily the same date as the borrower's original closing. The IRS publishes the governing text in Internal Revenue Bulletin 2009-40.

The mortgage documents control as well: tax rules also require the mortgage documents to allow the substitution. A structure that satisfies the tax requirements but not the loan agreement is not an effective defeasance.

After a compliant defeasance, the mortgage lien on the real estate may be released after the substitute collateral and required documentation are accepted. The CMBS trust is not simply bought out. The original debt may continue to exist against substitute collateral, and the property is released from that mortgage rather than the loan being extinguished.

3. Evaluating the Cost of Early Loan Release

Defeasance cost varies materially with interest rates, remaining loan term, required securities, transaction fees, and loan-specific conditions. There is no typical percentage of the outstanding balance. Trepp's CMBS Defeasance Playbook ties defeasance cost mechanics largely to Treasury pricing and describes how defeasance behavior has shifted across market cycles. An earlier Trepp analysis, CMBS Loan Defeasance Nears Last Year's Pace, describes loans defeased with bonds paying a higher rate than the loan, producing a negative defeasance premium. These are historical analyses, not current pricing quotes.

Illustrative only: on a $20 million loan balance, a $2 million total cost would equal 10% of the balance. That is arithmetic, not an expectation. It does not mean $2 million is normal, that 10% is expected, or that every $20 million CMBS loan has similar defeasance economics.

Prepayment restrictions can make it more expensive or complex to access additional property equity before the loan's open-prepayment period. A refinance lender will underwrite the total sources and uses, including payoff costs, prepayment obligations, transaction fees, property value, leverage, cash flow, and the renovation budget.

The Economic Test Before You Release a Loan Early

Before committing to an early release, compare the full set of numbers rather than the penalty alone:

  • Defeasance cost, including securities and transaction expenses.
  • Yield-maintenance cost if that mechanism applies instead.
  • Remaining interest expense under the existing loan.
  • Bridge interest and origination fees on any new facility.
  • Legal, accounting, consulting, and servicing costs.
  • Renovation and carrying costs through the planned exit.
  • Expected NOI improvement and expected value creation.
  • Remaining hold period and the terms of the intended permanent takeout.

Defeasance is not automatically justified because an asset has upside. It is a cost of moving early, and it has to be weighed against the cost of waiting.

4. Using Bridge Financing in a CMBS Recapitalization

Bridge financing may provide a flexible source of capital for a transaction involving CMBS payoff or defeasance, renovation capital, or a broader recapitalization, subject to underwriting. It is one possible method, not the only solution. Sponsor equity, a joint venture, preferred equity, a negotiated payoff, a loan assumption, or simply waiting for the open-prepayment period may each deserve a look.

A bridge facility may finance some or all approved transaction uses depending on collateral value, leverage, sponsor equity, cash flow, renovation scope, and exit strategy. A single facility should not be assumed to fund 100% of a CMBS payoff, 100% of a defeasance cost, and 100% of a renovation budget.

Projected value creation should be supported by market rents, renovation scope, comparable properties, NOI assumptions, costs, and third-party valuation. As a hypothetical planning example, a $5 million renovation budget is sometimes paired with an assumed $15 million increase in value. That pairing is a hypothetical used to explain underwriting logic, not a forecast. Leverage and future funding vary by lender and transaction.

After the CMBS mortgage is released, the property remains subject to any new bridge loan and any other surviving liens or obligations. Release of one mortgage does not make the property debt-free.

Bridge-loan maturity should provide sufficient time for renovations, stabilization, and the planned exit, with extension risk considered. An 18 to 24 month term is one common planning window, not a universal standard. The sponsor may renovate the property and pursue improved occupancy, rents, collections, and operating performance. Higher rents and NOI are objectives, not outcomes a lender controls.

After stabilization, the borrower may seek permanent refinancing if the property, cash flow, leverage, sponsor, and market satisfy the new lender's underwriting requirements. Agency execution, a permanent refinance, cash-out proceeds, and full bridge payoff are not guaranteed.

To size the income side of the plan, you can start with our cap rate calculator. It works with net operating income, cap rate, and property value. It does not calculate defeasance securities, a yield-maintenance amount, a CMBS payoff, bridge proceeds, or prepayment costs.

Following the process discipline discussed in The Discipline Loop: Why Your Process Beats Your Goals, sponsors can compare the total cost of an early loan release against the remaining hold period and the planned exit before committing capital.

For a related look at maturity-driven recapitalizations, see Navigating the Commercial Real Estate Maturity Cliff: Using Bridge Debt for Distressed Recapitalizations.

Price Capital Group evaluates commercial real estate opportunities involving complex capital structures, transitional properties, and recapitalization scenarios based on collateral, cash flow, leverage, sponsor liquidity, business plan, and exit strategy. If you are evaluating a commercial property with restrictive CMBS debt or a complex recapitalization, Submit a Property for a confidential review. A review does not guarantee financing, payoff relief, defeasance funding, or a refinancing.

This article is general educational information, not legal, tax, accounting, lending, or investment advice. Defeasance and yield-maintenance availability, cost, and mechanics depend on the loan documents, servicing requirements, securitization conditions, applicable tax rules, and the specific transaction. Consult qualified counsel, accountants, and advisers before acting.